Ubuntu Wiki

Contact: SomeoneE1se
Make: Lenovo
Brand: Ideapad
Model: S10-3t

Current Issues

• Multi-touch untested, but touch works out of the box in 10.10 and is fixable in 10.04.
  • Rather, there are no multi-touch apps; the uTouch tests work with 10.10

System Info

system-manufacturer: LENOVO

system-product-name: 20040M18

system-version: Lenovo Ideapad S10-3t

Sound

Speakers work out of the box with 10.04. To enable the headphone jack and mute speakers while you're using headphones. Run this command.

sudo nano /etc/modprobe.d/alsa-base.conf

and add the following line to the end.

options snd-hda-intel model="ideapad"

reboot and headphones should now work.

Internal Microphone

With the change in the alsa-base.conf to

options snd-hda-intel model=ideapad

without the ""

you get your internal microphone working.

To test this, install Audacity (with Synaptics) and change there, the Settings for input to HDA: Intel CONEXANT Analog (hw0:0)

links which can help: HD-Audio-Models HDAIntelSound Alsa/Sound/in10.04

Screen Rotation

Screen Rotation does not currently work out of the box with 10.04 or 10.10. A way to gain some rotation functionality is to save this script:

syntax_error=0
orientation=0

current_orientation="$(xrandr -q --verbose | grep 'connected' | egrep -o  '\) (normal|left|inverted|right) \(' | egrep -o '(normal|left|inverted|right)')"
case $current_orientation in
        normal)
                current_orientation=0
        ;;
        left)
                current_orientation=1
        ;;
        inverted)
                current_orientation=2
        ;;
        right)
                current_orientation=3
        ;;
esac

if [ $current_orientation -eq 0 ]; then
        orientation=2
fi

if [ $current_orientation -eq 2 ]; then
        orientation=0
fi
method=evdev

# LENOVO S10-3t CHANGE ==> Hard Coded my device number to 11!!!!!!!!

device=11
 
swap=0
invert_x=0
invert_y=0
real_topx=0
real_topy=0
real_bottomx=4020
real_bottomy=4020

case $orientation in
        0)
                swap=0
                invert_x=0
                invert_y=0
                topx=$real_topx
                topy=$real_topy
                bottomx=$real_bottomx
                bottomy=$real_bottomy
        ;;
        1)
                swap=1
                invert_x=1
                invert_y=0
                topx=$real_topx
                topy=$real_topy
                bottomx=$real_bottomy
                bottomy=$real_bottomx
        ;;
        2 )
                swap=0
                invert_x=1
                invert_y=1
                topx=$real_topx
                topy=$real_topy
                bottomx=$real_bottomx
                bottomy=$real_bottomy
        ;;
        3 )
                swap=1
                invert_x=0
                invert_y=1
                topx=$real_topx
                topy=$real_topy
                bottomx=$real_bottomy
                bottomy=$real_bottomx
        ;;
esac

if [ $method = "evdev" ]; then
        xinput set-prop "$device" "Evdev Axes Swap" $swap
        xinput set-prop "$device" "Evdev Axes Swap" $swap
        xinput set-prop "$device" "Evdev Axis Inversion" $invert_x $invert_y
        xinput set-prop "$device" "Evdev Axis Calibration" $topx $bottomx $topy $bottomy
        if [ $orientation = 2 ]; then           
                xrandr -o inverted
        fi
        if [ $orientation = 0 ]; then
                xrandr -o normal
        fi
fi

#

Change device number to the correct one listed in xinput --list --short. Each time the script is run from the terminal, it should flip the screen.

Hardware details

Notes

CategoryLaptop