AsusM6800Ne
Contact: ["NicolòChieffo"]
- Brand: ASUS
Model: M6800Ne
Website: http://www.asus.com/products4.aspx?l1=5&l2=24&l3=128&model=39&modelmenu=1
- S/N:
Current Issues
- ||
ASUSTeK Computer Inc. BR
Very rarely. Image heavily disturbed (flickering) if framebuffer is enabled: kind of resolution is to switch to console CTRL-ALT-F1 and switch back to X ALT-F7 every time you have this issue. Another fix may be disable framebuffer: add vga=normal to boot options, but you will lose splash screen at boot. [https://launchpad.net/malone/24270 #24270]
SD/MMC Card reader not supported. there is a [http://mmc.drzeus.cx/wiki/ project] which is trying to develop some drivers but it's at a beginning stage. [https://launchpad.net/malone/36964 #36964] Hibernate related problems in Dapper:
ipw2200 doesn't retain the card status (radio on/radio off) [https://launchpad.net/malone/37010 #37010]
hibernating from the log-out causes the screen not to be locked! [https://launchpad.net/malone/bugs/42052 #42052]
after sleep+resume+hibernate+resume I get a 255°C temperature shutdown and no ACPI evens [https://launchpad.net/malone/bugs/38423 #38423]
network-manager-gnome icon is lost, but the applet is still running
Sleep related problems in Dapper:
ipw2200 module can't be reloaded sometimes (you can tell to not remove it in /etc/default/acpi-support) [https://launchpad.net/malone/bugs/42387 #42387]
the system fails when restarting with this debug message: [numbers.numbers] Rebooting System. [https://launchpad.net/malone/29695 #29695]
When using dhcp as network configuration, I suggest to install network-manager-gnome or you will experience some unplug/replug problems
Multimedia hotkeys (except volume ones) are not handled in Dapper for now: go to Systm->Preferences->Keyboard Shortcuts and set them! [https://launchpad.net/malone/bugs/37225 #37225]
Power4gear hotkey not handled in Dapper, anyway its functionality is not to lock the screen but to switch between some predefined power profiles (powersave, dynamic, performance...) [https://launchpad.net/malone/35791 #35791] {X}MAJOR!{X} MAJOR! Don't press Fn+F8 in Dapper because it freezes the system at all [https://launchpad.net/malone/36885 #36885]
No tv-out support with the ati xorg module in Dapper [https://launchpad.net/malone/37764 #37764]
Touchpad hotkey not working in Dapper: SHMConfig option is unsecure and do not enabled by default [https://launchpad.net/malone/37234 #37234]
Stop hotkey not working if using totem [https://launchpad.net/malone/22025 #22025]
Multimedia hotkeys don't influence Totem if it's not the current selected window. [https://launchpad.net/malone/22025 40614 #40614]
Gnome power manager displays an uncorrect icon if you plug the AC before the computer is started, and your battery is not fully charged. You must re-plug the cable to update it [https://launchpad.net/malone/38632 #38632]
in Dapper ipw2200 doesn't retain the card status (radio on/radio off) after a reboot/hibernate/shutdown/sleep [https://launchpad.net/malone/37010 #37010]
in Dapper asus-wireless.sh wants to switch led on even if no wifi card is present. PLEASE CORRECT THIS BUG! I'VE PUT A SOLUTION IN THE BUG DESCRIPTION! [https://launchpad.net/malone/38354 #38354]
No tv-out support with the ati xorg module in Dapper [https://launchpad.net/malone/37764 #37764]
Touchpad button not working in Dapper: SHMConfig option is unsecure and do not enabled by default [https://launchpad.net/malone/37234 #37234]
Stop hotkey not working if using totem [https://launchpad.net/malone/22025 #22025]
Multimedia hotkeys don't influence Totem if it's not the current selected window. [https://launchpad.net/malone/22025 40614 #40614]
Hardware details
|
in Breezy (current stable)? |
in Dapper Flight 5 + updates (current developement)? |
Installation works? |
Yes (boot with nolapic at the end of boot options) |
Yes (nolapic no more needed) |
Hardware Information |
|||
Screen & Monitors |
|||
Device |
Works? |
Bug # |
|
in Breezy (current stable)? |
in Dapper (current developement)? |
||
Screen |
Yes (sometimes flickering) |
Yes (sometimes flickering) |
[https://launchpad.net/malone/24270 #24270] |
Correct resolution? |
Yes (1400x1050) |
Yes (1400x1050) |
|
Correct refresh rate? |
Yes (60Hz) |
Yes (60Hz) |
|
3D Acceleration |
if you install and configure fglrx (explained in notes) |
Yes (without fglrx, but with some warnings about r300_state.c and r300_render.c + quite slow rendering) |
|
External monitor works? |
with fglrx |
Yes, with some resolution problems (I tested a very old monitor which wasn't automatically detected). So I had to add this in xorg.conf, Section "Device"BROption "MonitorLayout" "LVDS, CRT"BRBut I got in trouble with resolutions. I hope newer monitors are detected |
[https://launchpad.net/malone/37574 #37574] |
External monitor - mirrors |
with fglrx |
Yes (default) |
|
External monitor - extend desktop |
with fglrx |
YesBRSpecify in xorg.conf, Section "Device"BROption "CRT2Position" "value" BRwhere value can be one of these:BRLeftOf , RightOf , Above , and Below |
|
TV - out |
with fglrx |
No. I couldn't find any options in the xorg radeon driver |
[https://launchpad.net/malone/37764 #37764] |
Power Management |
|||
Battery detected? |
Yes |
Yes |
|
Hibernates? |
Yes |
Yes |
|
Sleep |
Yes |
Yes, but reboot is broken at the end of runlevel 6 with a message: [numbers.numbers] Rebooting system. And ipw2200 is no more enabled |
[https://launchpad.net/malone/29695 #29695] [https://launchpad.net/malone/bugs/36403 #36403] |
Dim monitor on battery |
Yes |
Yes |
|
Blank monitor on inactivity |
Yes |
Yes, remember that before the timeout triggers you have to wait screensaver to be started |
[https://launchpad.net/malone/36568 #36568] |
Lid Close |
screen locked |
the screen is locked if you keep the lid closed for at least 10 seconds |
|
Cpu frequency scaling |
Yes |
Yes |
|
Sound |
|||
Sound works? |
Yes |
Yes |
|
Correct volume? |
Yes |
Yes |
|
Hardware volume switch |
Yes |
Yes |
|
Headphone jack |
Yes |
Yes |
|
Mic jack |
Yes |
Yes |
|
Networking |
|||
Wired NIC |
Yes (if network is dhcp and No dhcp servers are present (e.g. when cable is unlinked) boot hangs on configuring network interfaces so press CTRL C) |
network not always enabled at startup (few times): I need to run dhclient eth0 + if dhclient is sleeping and a cable is inserted dhclient is not woken up! |
|
Wireless NIC |
Yes (might be some problems as in Wired NIC) |
Yes, but at boot someone should check the latest card status, before deciding to swich it on |
[https://launchpad.net/malone/bugs/37010 #37010] [https://launchpad.net/malone/bugs/37515 #37515] |
PCMCIA NIC |
Untested |
Yes (tested with an usb2 card) |
|
Firewire |
Untested |
Untested |
|
Bluetooth |
No Bluetooth adapter |
No Bluetooth adapter |
|
Modem |
Untested |
Untested |
|
Infrared |
Untested |
Untested |
|
Touchpad & Mice |
|||
Touchpad |
Yes (see notes) |
Yes, but settings cannot be changed on the fly |
[https://launchpad.net/malone/bugs/29595 #29595] BR [https://launchpad.net/malone/bugs/37234 #37234] |
Touchpad - Doubletap = double click |
Yes |
Yes |
|
Touchpad - Scroll down side |
Yes |
Yes |
|
External mouse - USB |
Yes |
Yes |
|
External mouse - Serial |
No serial port |
No serial port |
|
Docking Station/Port Replicator |
|||
AC through replicator |
Untested |
Untested |
|
USB |
Untested |
Untested |
|
Serial |
Untested |
Untested |
|
Parallel |
Untested |
Untested |
|
External Monitor - VGA |
Untested |
Untested |
|
External Monitor - DVI |
Untested |
Untested |
|
Modem |
Untested |
Untested |
|
NIC |
Untested |
Untested |
|
PS/2 |
Untested |
Untested |
|
Additional Hardware |
|||
Fingerprint reader |
what's that? |
what's that? |
|
CD/DVD drive |
Yes (see notes) |
Yes (DMA already enabled by default) |
|
PCMCIA cards |
Untested |
Untested |
|
Parallel Ports |
Untested |
Untested |
|
Card reader(s) |
Not working |
Not working |
[https://launchpad.net/malone/36964 #36964] |
Function and other keys |
|||||
Fn key |
Operation |
Keycode |
Works? |
Bug # |
|
in Breezy (current stable)? |
in Dapper (current developement)? |
||||
+ F1 |
Sleep |
SLPB 00000080 |
|
Yes |
|
+ F2 |
Toggle Wireless and Led |
ATKD 0000005d |
Yes |
Yes |
|
+ F5 |
Brightness Down |
ATKD 0000002e |
Yes (indicator missing!) |
Yes (indicator missing!) |
[https://launchpad.net/malone/29527 #29527] |
+ F6 |
Brightness Up |
ATKD 0000001f |
Yes (indicator missing!) |
Yes (indicator missing!) |
[https://launchpad.net/malone/29527 #29527] |
+ F7 |
LCD on/off |
ATKD 00000034 (off) ATKD 00000033 (on) |
Yes |
Yes |
|
+ F8 |
Switch LCD/External |
ATKD 00000060 |
No |
NO! |
[https://launchpad.net/malone/36885 #36885] |
+ F10 |
Toggle Sound |
ATKD 00000032 |
Yes |
Yes |
|
+ F11 |
Decrease Volume |
ATKD 00000031 |
Yes |
Yes |
|
+ F12 |
Increase Volume |
ATKD 00000030 |
Yes |
Yes |
|
Other special keys |
|||||
Key |
Operation |
Keycode |
Works? |
Bug # |
|
in Breezy (current stable)? |
in Dapper (current developement)? |
||||
Evolution |
ATKD 00000050 |
Yes |
Yes |
|
|
Browser |
Firefox |
ATKD 00000051 |
Yes |
Yes |
|
Wireless |
Toggle wireless and led |
ATKD 0000005d |
Yes |
Yes |
|
Touchpad |
Toggle touchpad |
ATKD 0000006a |
if you add Option "SHMConfig" "on" in /etc/X11/xorg.conf, touchpad section |
same as breezy |
[https://launchpad.net/malone/37234 #37234] |
power 4 gear |
switch different power configurations (e.g. performance, ondemand, powersave) |
ATKD 0000005c |
???locks screen??? |
???locks screen??? |
|
Previous |
Previous song |
ATKD 00000040 |
Yes |
Yes |
|
Stop |
Stops song |
ATKD 00000043 |
Yes |
Not in totem |
[https://launchpad.net/malone/22025 #22025] |
Play/Pause |
Play/Pause |
ATKD 00000045 |
Yes |
Yes (only with rhythmbox and totem) |
|
Next |
Next song |
ATKD 00000041 |
Yes (only with rhythmbox and totem) |
Yes (only with rhythmbox and totem) |
|
CD Player |
ejects cd |
ATKD 0000004c |
Yes |
Yes |
|