AcerAspire5051AWXMi
Revision 3 as of 2007-04-29 19:25:53
Clear message
- Contact: Roel Schiphorst
- Brand: Acer
- Make : Acer
- Model: Aspire 5051AWXMi
Website: http://support.acer-euro.com/drivers/notebook/as_5050.html
- S/N: -
- Note: There seems to be multiple versions of this notebook. Here, the version with the Broadcom WLAN adapter and 2000 mAh Li-ion battery is described.
Current Issues
Ubuntu 7.04 (64-bit):
- Hibernate does not work.
- Some function keys like the euro key do not work.
- Occasionally the Broadcom WLAN adapters does not work. (IRQ not ready error.) This can be fixed by unloading and loading the bcm43xx module.
- WLAN does not function after suspend.
System Info
bios-version:v1.3302 system-manufacturer:Acer, inc. system-product-name:Aspire 5050 system-version:Not Applicable
Hardware details
|
in Edgy (current stable)? |
in Feisty (current development)? |
|
Installation works? |
Untested |
Yes (64-bit) |
|
Hardware Information |
|||
- Processor: AMD_Turion 64 MK36, 2GHz CPU
- Screen: 14.1" WXGA LCD
- Chipset: ATI Radeon Xpress 1100
- Harddisk: 60 GB HDD
- DVD drive: DVD R/W + RAM
- Memory: 512 MB DDR2
- Wireless LAN: 802.11b/g
Screen & Monitors |
|||
Device |
Works? |
Bug # |
|
in Edgy (current stable)? |
in Feisty (current development)? |
||
Screen |
Untested |
Yes (fglrx driver) |
|
Correct resolution? |
Untested |
Yes (fglrx driver, 1280x800) |
|
Correct refresh rate? |
Untested |
Yes (fglrx driver, 60 Hz) |
|
3D Acceleration |
Untested |
No |
|
External monitor works? |
Untested |
Yes (fglrx driver) |
|
External monitor - mirrors |
Untested |
Yes (fglrx driver) |
|
External monitor - extend desktop |
Untested |
Untested |
|
Power Management |
|||
Battery detected? |
Untested |
Yes |
|
Hibernates? |
Untested |
No |
|
Sleep |
Untested |
Yes |
WLAN not working after resume. |
Dim monitor on battery |
Untested |
No |
|
Blank monitor on inactivity |
Untested |
Yes |
|
Lid Close |
Untested |
Yes |
|
Cpu frequency scaling |
Untested |
Yes |
|
Sound |
|||
Sound works? |
Untested |
Yes (see notes below) |
|
Correct volume? |
Untested |
Yes |
|
Hardware volume switch |
Untested |
Untested |
|
Headphone jack |
Untested |
Untested |
|
Mic jack |
Untested |
Untested |
|
Networking |
|||
Wired NIC |
Untested |
Yes |
|
Wireless NIC |
Untested |
Yes |
|
PCMCIA NIC |
Untested |
Untested |
|
Firewire |
Untested |
NA |
|
Bluetooth |
Untested |
NA |
|
Modem |
Untested |
Untested |
|
Infrared |
Untested |
Untested |
|
Touchpad & Mice |
|||
Touchpad |
Untested |
Yes |
|
Touchpad - Doubletap = double click |
Untested |
Yes |
|
Touchpad - Scroll down side |
Untested |
Untested |
|
Touchpad - turned off while typing |
Untested |
Use Fn+F7 to switch off |
|
External mouse - USB |
Untested |
Yes |
|
External mouse - Serial |
Untested |
Untested |
|
Docking Station/Port Replicator |
|||
AC through replicator |
Untested |
NA |
|
USB |
Untested |
NA |
|
Serial |
Untested |
NA |
|
Parallel |
Untested |
NA |
|
External Monitor - VGA |
Untested |
NA |
|
External Monitor - DVI |
Untested |
NA |
|
Modem |
Untested |
NA |
|
NIC |
Untested |
NA |
|
PS/2 |
Untested |
NA |
|
Additional Hardware |
|||
Fingerprint reader |
Untested |
NA |
|
CD/DVD drive |
Untested |
Yes |
|
PCMCIA cards |
Untested |
Untested |
|
Parallel Ports |
Untested |
NA |
|
Card reader(s) |
Untested |
Untested |
|
Function and other keys |
|||||
Fn key |
Operation |
Keycode |
Works? |
Bug # |
|
in Edgy (current stable)? |
in Feisty (current development)? |
||||
+ Space |
|
|
Untested |
Untested |
|
|| + Esc || || || Untested || Untested || ||
+ F1 |
Help |
|
Untested |
Yes |
|
+ F2 |
|
|
Untested |
Untested |
|
+ F3 |
|
|
Untested |
Untested |
|
+ F4 |
Sleep |
|
Untested |
Yes |
|
+ F5 |
|
|
Untested |
Untested |
|
+ F6 |
|
|
Untested |
Untested |
|
+ F7 |
Disable/Enable Touchpad |
|
Untested |
Yes |
|
+ F8 |
Mute/Unmute Sound |
|
Untested |
Yes |
|
+ F9 |
|
|
Untested |
Untested |
|
+ F10 |
|
|
Untested |
Untested |
|
+ F11 |
Num lock on/off |
|
Untested |
Yes |
|
+ F12 |
Scroll lock on/off |
|
Untested |
Yes |
|
+ ArrowUp |
Volume up |
|
Untested |
Yes |
|
Volume down |
|
Untested |
Yes |
|
|
Lighten display |
|
Untested |
Yes |
|
|
Dim display |
|
Untested |
Yes |
|
|
+ PgUp |
Stop track |
|
Untested |
Yes |
|
+ PgDown |
Previous track |
|
Untested |
Yes |
|
+ End |
Next track |
|
Untested |
Yes |
|
+ Home |
Previous track |
|
Untested |
Yes |
|
Other special keys |
|||||
Key |
Operation |
Keycode |
Works? |
Bug # |
|
in Edgy (current stable)? |
in Feisty (current development)? |
||||
$ next to Arrow-Up |
Supposed to type $ |
|
Untested |
No |
|
€ next to Arrow-Up |
Supposed to type € |
|
Untested |
No |
|
Mail-Button |
starts your Mail Client |
|
Untested |
Yes |
|
Internet-Button |
starts your Browser |
|
Untested |
Yes |
|
Acer e-Button |
|
|
Untested |
Untested |
|
"P"-Button |
|
|
Untested |
Untested |
|
Notes
More information will be added soon.
output lspci -vv:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37 (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8434 [size=4]
Region 2: I/O ports at 8438 [size=8]
Region 3: I/O ports at 8430 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 6c000000 [disabled] [size=512K]
Capabilities: <access denied>
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 8410 [size=16]
Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80) (prog-if 82 [Master PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8420 [size=16]
Capabilities: <access denied>
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=08, subordinate=0c, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Prefetchable memory behind bridge: 68000000-6bffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: <access denied>
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: <access denied>
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
08:01.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c0202000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176
Memory window 0: 68000000-6bfff000 (prefetchable)
Memory window 1: 70000000-73fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
08:01.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c0203000 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
08:01.2 Generic system peripheral [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 18000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at c0203400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
08:01.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c0203800 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
08:01.4 FLASH memory: ENE Technology Inc Unknown device 0551 (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 255
Region 0: Memory at c0203100 (32-bit, non-prefetchable) [disabled] [size=256]
Capabilities: <access denied>
08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 010f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at c0203c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
08:04.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: AMBIT Microsystem Corp. TravelMate 2410
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=8K]output dmesg:
[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] Command line: root=UUID=4a5e2c40-ce95-4bdd-a2c2-839d43db9dcb ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000057e90000 (usable) [ 0.000000] BIOS-e820: 0000000057e90000 - 0000000057e9c000 (ACPI data) [ 0.000000] BIOS-e820: 0000000057e9c000 - 0000000057f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000057f00000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 360080) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f8a20 [ 0.000000] ACPI: RSDT (v001 ACRSYS ACRPRDCT 0x06040000 LTP 0x00000000) @ 0x0000000057e94c0d [ 0.000000] ACPI: FADT (v001 ATI Bowfin 0x06040000 ATI 0x000f4240) @ 0x0000000057e9bc57 [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x0000000057e9bccb [ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x0000000057e9bde0 [ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x0000000057e9be26 [ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0000000057e9be62 [ 0.000000] ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x06040000 acer 0x00000000) @ 0x0000000057e9be8a [ 0.000000] ACPI: DSDT (v001 ATI SB460 0x06040000 MSFT 0x02000002) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000057e90000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 360080) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000057e90000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 360080 [ 0.000000] On node 0 totalpages: 359981 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1087 pages reserved [ 0.000000] DMA zone: 2854 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4866 pages used for memmap [ 0.000000] DMA32 zone: 351118 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009d000 - 000000000009e000 [ 0.000000] Nosave address range: 000000000009e000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000d0000 [ 0.000000] Nosave address range: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 353972 [ 0.000000] Kernel command line: root=UUID=4a5e2c40-ce95-4bdd-a2c2-839d43db9dcb ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 12.899414] Console: colour VGA+ 80x25 [ 12.901122] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 12.903837] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 12.904777] Checking aperture... [ 12.904782] CPU 0: aperture @ a3ea000000 size 32 MB [ 12.904784] Aperture too small (32 MB) [ 12.916472] No AGP bridge found [ 12.935872] Memory: 1405336k/1440320k available (2217k kernel code, 34588k reserved, 1162k data, 304k init) [ 13.012309] Calibrating delay using timer specific routine.. 4004.21 BogoMIPS (lpj=8008432) [ 13.012371] Security Framework v1.0.0 initialized [ 13.012376] SELinux: Disabled at boot. [ 13.012402] Mount-cache hash table entries: 256 [ 13.012558] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 13.012560] CPU: L2 Cache: 512K (64 bytes/line) [ 13.012563] CPU 0/0 -> Node 0 [ 13.012584] SMP alternatives: switching to UP code [ 13.012798] Freeing SMP alternatives: 24k freed [ 13.012911] Early unpacking initramfs... done [ 13.349839] ACPI: Core revision 20060707 [ 13.353285] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 13.867110] Using local APIC timer interrupts. [ 13.917015] result 12500240 [ 13.917017] Detected 12.500 MHz APIC timer. [ 13.918625] Brought up 1 CPUs [ 13.918669] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 13.918671] time.c: Detected 2000.036 MHz processor. [ 13.918994] Time: 18:06:57 Date: 03/29/107 [ 13.919033] NET: Registered protocol family 16 [ 13.919117] ACPI: bus type pci registered [ 13.919127] PCI: Using configuration type 1 [ 13.925846] ACPI: Interpreter enabled [ 13.925849] ACPI: Using IOAPIC for interrupt routing [ 13.926279] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.926283] PCI: Probing PCI hardware (bus 00) [ 13.927981] Boot video device is 0000:01:05.0 [ 13.928924] PCI: Transparent bridge - 0000:00:14.4 [ 13.928998] PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses') [ 13.929001] Please report the result to linux-kernel to fix this permanently [ 13.929044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.932151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 13.932379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 13.932593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 13.932857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 13.934272] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 13.934528] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 13.934817] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 13.935063] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 13.935312] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 13.935561] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 13.935810] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 13.936057] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 13.936306] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 13.958926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 13.959233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 13.959772] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.959781] pnp: PnP ACPI init [ 13.962403] pnp: PnP ACPI: found 10 devices [ 13.962459] PCI: Using ACPI for IRQ routing [ 13.962462] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.962469] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 [ 13.962471] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0 [ 13.962474] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 13.962476] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 13.962478] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0 [ 13.962480] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0 [ 13.962483] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0 [ 13.962485] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0 [ 13.962607] NET: Registered protocol family 8 [ 13.962609] NET: Registered protocol family 20 [ 13.962925] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [ 13.962929] pnp: 00:08: ioport range 0x220-0x22f has been reserved [ 13.963221] PCI: Bridge: 0000:00:01.0 [ 13.963223] IO window: 9000-9fff [ 13.963227] MEM window: c0100000-c01fffff [ 13.963230] PREFETCH window: c8000000-cfffffff [ 13.963232] PCI: Bridge: 0000:00:04.0 [ 13.963234] IO window: disabled. [ 13.963236] MEM window: disabled. [ 13.963238] PREFETCH window: disabled. [ 13.963240] PCI: Bridge: 0000:00:05.0 [ 13.963241] IO window: disabled. [ 13.963244] MEM window: disabled. [ 13.963246] PREFETCH window: disabled. [ 13.963248] PCI: Bridge: 0000:00:06.0 [ 13.963249] IO window: disabled. [ 13.963251] MEM window: disabled. [ 13.963253] PREFETCH window: disabled. [ 13.963255] PCI: Bridge: 0000:00:07.0 [ 13.963257] IO window: disabled. [ 13.963259] MEM window: disabled. [ 13.963261] PREFETCH window: disabled. [ 13.963273] PCI: Bus 9, cardbus bridge: 0000:08:01.0 [ 13.963275] IO window: 0000a400-0000a4ff [ 13.963281] IO window: 0000a800-0000a8ff [ 13.963287] PREFETCH window: 68000000-6bffffff [ 13.963293] MEM window: 70000000-73ffffff [ 13.963298] PCI: Bridge: 0000:00:14.4 [ 13.963301] IO window: a000-afff [ 13.963308] MEM window: c0200000-c02fffff [ 13.963313] PREFETCH window: 68000000-6bffffff [ 13.963351] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 13.963358] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 13.963364] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 13.963371] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 13.963394] PCI: Enabling device 0000:08:01.0 (0000 -> 0003) [ 13.963403] ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 13.963500] NET: Registered protocol family 2 [ 13.998515] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 13.999000] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 14.002837] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 14.003778] TCP: Hash tables configured (established 262144 bind 65536) [ 14.003782] TCP reno registered [ 14.014534] checking if image is initramfs... it is [ 14.639223] Freeing initrd memory: 7328k freed [ 14.645937] Simple Boot Flag at 0x36 set to 0x1 [ 14.646309] audit: initializing netlink socket (disabled) [ 14.646321] audit(1177870017.244:1): initialized [ 14.646465] VFS: Disk quotas dquot_6.5.1 [ 14.646485] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 14.646533] io scheduler noop registered [ 14.646535] io scheduler anticipatory registered [ 14.646537] io scheduler deadline registered [ 14.646549] io scheduler cfq registered (default) [ 14.646808] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 14.646827] assign_interrupt_mode Found MSI capability [ 14.646831] Allocate Port Service[0000:00:04.0:pcie00] [ 14.646893] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 14.646912] assign_interrupt_mode Found MSI capability [ 14.646914] Allocate Port Service[0000:00:05.0:pcie00] [ 14.646977] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 14.646996] assign_interrupt_mode Found MSI capability [ 14.646998] Allocate Port Service[0000:00:06.0:pcie00] [ 14.647057] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 14.647075] assign_interrupt_mode Found MSI capability [ 14.647077] Allocate Port Service[0000:00:07.0:pcie00] [ 14.670009] Real Time Clock Driver v1.12ac [ 14.670052] Linux agpgart interface v0.102 (c) Dave Jones [ 14.670055] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.670634] mice: PS/2 mouse device common for all mice [ 14.671143] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.671340] input: Macintosh mouse button emulation as /class/input/input0 [ 14.671376] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 14.671380] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 14.671642] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 14.675588] i8042.c: Detected active multiplexing controller, rev 1.1. [ 14.676594] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.676599] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 14.676601] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 14.676604] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 14.676606] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 14.676694] TCP cubic registered [ 14.676703] NET: Registered protocol family 1 [ 14.676848] ACPI: (supports S0 S3 S4 S5) [ 14.676891] Magic number: 3:142:141 [ 14.677044] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 14.677117] Freeing unused kernel memory: 304k freed [ 14.708359] input: AT Translated Set 2 keyboard as /class/input/input1 [ 15.873223] Capability LSM initialized [ 15.886021] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 15.912192] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 15.915450] ACPI: Thermal Zone [THRM] (25 C) [ 16.507470] SCSI subsystem initialized [ 16.533688] libata version 2.20 loaded. [ 16.535090] sata_sil 0000:00:12.0: version 2.2 [ 16.535117] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 16.535185] ata1: SATA max UDMA/100 cmd 0xffffc2000000c080 ctl 0xffffc2000000c08a bmdma 0xffffc2000000c000 irq 22 [ 16.535217] ata2: SATA max UDMA/100 cmd 0xffffc2000000c0c0 ctl 0xffffc2000000c0ca bmdma 0xffffc2000000c008 irq 22 [ 16.535232] scsi0 : sata_sil [ 16.541147] usbcore: registered new interface driver usbfs [ 16.541172] usbcore: registered new interface driver hub [ 16.541193] usbcore: registered new device driver usb [ 16.582477] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 16.690857] 8139too Fast Ethernet driver 0.9.28 [ 17.004578] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 17.014619] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 17.024650] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 17.034676] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 17.044703] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 17.054729] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 17.064755] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 17.075224] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 17.075251] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x3) [ 18.054532] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 18.064572] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 18.074601] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 18.084627] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 18.094653] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 18.104680] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 18.115147] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 18.115172] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x3) [ 18.115178] ata1.00: limiting speed to UDMA7:PIO5 [ 19.096494] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 19.106532] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 19.116560] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 19.126585] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 19.136612] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 19.146639] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 19.157105] ATA: abnormal status 0x7F on port 0xffffc2000000c087 [ 19.157131] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x3) [ 20.138450] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 20.138473] scsi1 : sata_sil [ 20.609515] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 20.619556] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 20.629589] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 20.639616] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 20.649643] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 20.659669] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 20.669695] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 20.680161] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 20.680187] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3) [ 21.659473] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 21.669513] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 21.679543] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 21.689568] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 21.699595] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 21.709622] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 21.720086] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 21.720112] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3) [ 21.720117] ata2.00: limiting speed to UDMA7:PIO5 [ 22.701428] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 22.711468] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 22.721497] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 22.731523] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 22.741550] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 22.751577] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 22.762041] ATA: abnormal status 0x7F on port 0xffffc2000000c0c7 [ 22.762067] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3) [ 23.743387] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 23.746461] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.746480] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 23.746832] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 23.746858] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0005000 [ 23.803387] usb usb1: configuration #1 chosen from 1 choice [ 23.803415] hub 1-0:1.0: USB hub found [ 23.803426] hub 1-0:1.0: 4 ports detected [ 23.907165] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.907183] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 23.907207] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 23.907225] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0006000 [ 23.963068] usb usb2: configuration #1 chosen from 1 choice [ 23.963092] hub 2-0:1.0: USB hub found [ 23.963107] hub 2-0:1.0: 4 ports detected [ 24.067472] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 24.067494] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 24.067506] ATIIXP: chipset revision 128 [ 24.067508] ATIIXP: not 100% native mode: will probe irqs later [ 24.067516] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:DMA [ 24.067531] ATIIXP: simplex device: DMA disabled [ 24.067533] ide1: ATIIXP Bus-Master DMA disabled (BIOS) [ 24.067536] Probing IDE interface ide0... [ 24.358583] hda: Hitachi HTS541660J9AT00, ATA DISK drive [ 25.145039] hdb: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive [ 25.201088] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 25.582318] Probing IDE interface ide1... [ 26.147444] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 26.147463] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 26.147661] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 26.147722] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0007000 [ 26.147734] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.148756] usb usb3: configuration #1 chosen from 1 choice [ 26.148924] hub 3-0:1.0: USB hub found [ 26.148935] hub 3-0:1.0: 8 ports detected [ 26.154411] hda: max request size: 512KiB [ 26.164915] hda: 117210240 sectors (60011 MB) w/7512KiB Cache, CHS=16383/255/63, UDMA(100) [ 26.165152] hda: cache flushes supported [ 26.165200] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > [ 26.255786] ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 26.256573] eth0: RealTek RTL8139 at 0xffffc2000002ac00, 00:16:36:90:ad:40, IRQ 20 [ 26.256576] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 26.258675] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 26.279221] hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 26.279229] Uniform CD-ROM driver Revision: 3.20 [ 26.944458] Attempting manual resume [ 26.944462] swsusp: Resume From Partition 3:5 [ 26.944464] PM: Checking swsusp image. [ 27.004748] PM: Resume from disk failed. [ 27.116331] kjournald starting. Commit interval 5 seconds [ 27.116342] EXT3-fs: mounted filesystem with ordered data mode. [ 40.008150] eth0: link down [ 41.566540] NET: Registered protocol family 17 [ 41.796007] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 41.800968] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 42.065159] Yenta: CardBus bridge found at 0000:08:01.0 [1025:010f] [ 42.065191] Yenta: Using CSCINT to route CSC interrupts to PCI [ 42.065192] Yenta: Routing CardBus interrupts to PCI [ 42.065199] Yenta TI: socket 0000:08:01.0, mfunc 0x00001202, devctl 0x44 [ 42.089064] sdhci: Secure Digital Host Controller Interface driver [ 42.089068] sdhci: Copyright(c) Pierre Ossman [ 42.299600] Yenta: ISA IRQ mask 0x04f8, PCI irq 23 [ 42.299606] Socket status: 30000006 [ 42.299609] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c [ 42.299617] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 42.299621] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff [ 42.299624] pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x6bffffff [ 42.299952] sdhci: SDHCI controller found at 0000:08:01.2 [1524:0550] (rev 1) [ 42.299975] ACPI: PCI Interrupt 0000:08:01.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 42.300051] mmc0: SDHCI at 0xc0203400 irq 22 DMA [ 42.305138] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 42.476964] ieee80211_crypt: registered algorithm 'NULL' [ 42.528028] input: PC Speaker as /class/input/input2 [ 42.554623] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 42.554627] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 42.713175] bcm43xx driver [ 42.713290] ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 43.184142] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 43.232165] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 43.365742] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.828239] fuse init (API version 7.8) [ 43.923242] lp: driver loaded but no devices found [ 43.974100] Adding 1052216k swap on /dev/disk/by-uuid/bcc225b0-4560-449e-9233-12916eda7b5c. Priority:-1 extents:1 across:1052216k [ 44.530967] EXT3 FS on hda10, internal journal [ 45.305094] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 45.383586] NTFS volume version 3.1. [ 45.386289] kjournald starting. Commit interval 5 seconds [ 45.386487] EXT3 FS on hda6, internal journal [ 45.386491] EXT3-fs: mounted filesystem with ordered data mode. [ 50.483608] ACPI: Battery Slot [BAT1] (battery present) [ 50.521088] No dock devices found. [ 50.603829] ACPI: AC Adapter [ACAD] (off-line) [ 50.614872] ibm_acpi: ec object not found [ 50.639705] Using specific hotkey driver [ 50.704750] input: Power Button (FF) as /class/input/input4 [ 50.708967] ACPI: Power Button (FF) [PWRF] [ 50.733255] input: Power Button (CM) as /class/input/input5 [ 50.737417] ACPI: Power Button (CM) [PWRB] [ 50.762155] input: Lid Switch as /class/input/input6 [ 50.766316] ACPI: Lid Switch [LID] [ 50.790828] input: Sleep Button (CM) as /class/input/input7 [ 50.794987] ACPI: Sleep Button (CM) [SLPB] [ 50.879463] pcc_acpi: loading... [ 50.904984] wmi_add device=ffff8100550e9800 [ 50.904988] calling WQBA [ 51.094392] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-36 processors (version 2.00.00) [ 51.094437] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x10 [ 51.094439] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12 [ 51.094442] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 [ 51.094444] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18 [ 56.121215] SoftMAC: Open Authentication completed with 00:03:6d:f4:e0:a8 [ 56.129486] Losing some ticks... checking if CPU frequency changed. [ 57.496139] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 57.502712] [fglrx] Maximum main memory to use for locked dma buffers: 1281 MBytes. [ 57.502984] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0 [ 57.528817] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 58.141034] ppdev: user-space parallel port driver [ 64.846664] Bluetooth: Core ver 2.11 [ 64.847045] NET: Registered protocol family 31 [ 64.847048] Bluetooth: HCI device and connection manager initialized [ 64.847051] Bluetooth: HCI socket layer initialized [ 64.885246] Bluetooth: L2CAP ver 2.8 [ 64.885250] Bluetooth: L2CAP socket layer initialized [ 64.941578] Bluetooth: RFCOMM socket layer initialized [ 64.941591] Bluetooth: RFCOMM TTY layer initialized [ 64.941593] Bluetooth: RFCOMM ver 1.8 [ 65.056806] NET: Registered protocol family 10 [ 65.056896] lo: Disabled Privacy Extensions [ 65.056946] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 67.227982] hda-intel: Invalid position buffer, using LPIB read method instead.